Levin Pivot Polisher Spindle and Bearings

Original Levin Pivot Polisher Spindle and Bearings.

Spindle has external taper at end for mounting laps and the other end is sized for knob and tapped 4-48 for knob retaining screw.

Spindle and bearing must be lapped to fit.

The bearings are normally a very light press fit to the Levin pivot polisher yoke. You'll want to check the size of the yoke to make sure, so that you don't crack the yoke when you press fit the bearing. You will then need to lap spindle down about .0001" to get the fit you desire.

Made by Levin in the USA.

Condition:  New

Levin Pivot Polisher Spindle and Bearings
Click To Enlarge
  • Item #: 7279
  * Marked fields are required.
Qty*
Price $100.00
Availability In-Stock